2715979 DIKD1.5

https://www.phoenixcontact.com/gb/products/2715979 Sensor/actuator terminal block - DIKD 1,5 - 2715979 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator terminal block, Cross section:  0.2 mm² - 4 mm², AWG: 24 - 12, Connection type: Screw connection, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Why buy this product ■ ■ The first initiator can also be connected to this three-conductor feed-through terminal block The positive and negative potential can be supplied to the insertion bridges via this power terminal block Key Commercial Data Packing unit 50 pc GTIN Weight per Piece (excluding packing) 19.31 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 3 Number of connections 6 Nominal cross section 2.5 mm² Color gray Insulating material PA Flammability rating according to UL 94 V2 Rated surge voltage 4 kV Degree of pollution 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 24 A Maximum load current 30 A (with 4 mm² conductor cross section) 10/03/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/2715979 Sensor/actuator terminal block - DIKD 1,5 - 2715979 Technical data General Nominal voltage UN 250 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 4.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.5 kV Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.2 mm² / 0.2 kg 2.5 mm² / 0.7 kg 4 mm² / 0.9 kg Tensile test result Test passed Conductor cross section tensile test 0.2 mm² Tractive force setpoint 10 N Conductor cross section tensile test 2.5 mm² Tractive force setpoint 50 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 2.5 mm² Short-time current 0.3 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec.; UL 746 B) 125 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 115 °C Dimensions Width 6.2 mm Length 72.5 mm Height NS 35/7,5 54.5 mm 10/03/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/2715979 Sensor/actuator terminal block - DIKD 1,5 - 2715979 Technical data Dimensions Height NS 35/15 62 mm Connection data Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 1 mm² Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 2.5 mm² Stripping length 8 mm Internal cylindrical gage A3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V2 10/03/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/2715979 Sensor/actuator terminal block - DIKD 1,5 - 2715979 Classifications eCl@ss eCl@ss 4.0 27141118 eCl@ss 4.1 27141118 eCl@ss 5.0 27141118 eCl@ss 5.1 27141118 eCl@ss 6.0 27141128 eCl@ss 7.0 27141128 eCl@ss 8.0 27141128 ETIM ETIM 2.0 EC000900 ETIM 3.0 EC000900 ETIM 4.0 EC000900 ETIM 5.0 EC000900 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 28-14 10/03/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/2715979 Sensor/actuator terminal block - DIKD 1,5 - 2715979 Approvals     Nominal current IN 15 A Nominal voltage UN 300 V UL Recognized    B C D mm²/AWG/kcmil 30-14 30-14 30-14 Nominal current IN 15 A 15 A 10 A Nominal voltage UN 300 V 150 V 300 V   B C D mm²/AWG/kcmil 30-14 30-14 30-14 Nominal current IN 15 A 15 A 10 A Nominal voltage UN 300 V 150 V 300 V cUL Recognized  EAC  EAC  cULus Recognized  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 10/03/2016   Page 5 / 5